What a sump pump does
A sump pump sits in a pit in the lowest part of many basements. When groundwater fills the pit, a float switch turns the pump on and sends the water out and away from the house. When it works, nobody notices. When it fails during heavy rain or snowmelt, water can reach the basement floor quickly.
Signs your sump pump needs attention
- The pump doesn't turn on when the pit fills with water
- It runs constantly, or switches on and off every few seconds
- Grinding, rattling or humming noises
- Visible rust, or a pit with silt and debris built up
- Water in the pit that isn't being pumped out
- A pump that's old. Many last roughly 7 to 10 years, sometimes less if they work hard
Why it matters in Edmonton
Spring snowmelt and heavy summer storms are the two times a sump pump works hardest here. Those are also the times it's most likely to be discovered broken, because it may not have run for months. A quick test before the busy season is far cheaper than a flooded basement.
How to test your sump pump
- Check that it's plugged in and that the outlet has power. A tripped breaker or GFCI is a common reason a pump doesn't run.
- Pour water slowly into the pit until the float rises.
- Watch that the pump starts, empties the pit, and shuts off by itself.
- Check the discharge outside. Water should be leaving the house and flowing away from the foundation, not backing up or frozen in the line.
If anything on that list doesn't work the way it should, give us a call.
What we do
- Diagnose why the pump isn't working: power, float switch, the pump itself, or the discharge line.
- Repair what can be repaired.
- Replace pumps that are worn out or beyond repair, with the price explained before we start.
- Check the discharge so the water you pump out actually goes somewhere useful.
Sump pumps depend on electricity, so a power outage during a storm can stop them. If that worries you, ask us about your options when we're there.
What affects the cost
It depends on whether your pump needs a repair or a replacement, the type of pump, the state of the pit, and how the discharge is set up. You'll know the price before any work begins.
Where we provide sump pump service
We serve Edmonton and the surrounding communities:
Frequently asked questions
How long does a sump pump last?
Many last roughly 7 to 10 years, though it depends on how often they run and how well they've been looked after. An older pump is worth checking before storm season.
Why does my sump pump run all the time?
Common causes include a stuck float switch, a failed check valve that lets water drain back into the pit, or a very high water table. It's worth having looked at, because constant running wears the pump out.
How often should I test it?
A good habit is to test it in spring, before the snow melts, and again before the heavy summer storm season.
Can you help if my pump has already failed and water is coming in?
Call us right away. We're open 24/7, and failures during a storm are exactly the kind of call we prioritize.