What we install
- Faucets: kitchen and bathroom, including replacing old or leaking ones
- Toilets: removal of the old toilet, a new seal, and a secure, level install
- Sinks: kitchen and bathroom sinks, including the connections beneath them
We also replace worn supply lines and shut-off valves under the fixture if they need it, so the new fixture isn't hooked up to old parts.


Why a proper install matters
Most fixture leaks come from the installation, not the fixture itself. A supply line that's slightly over- or under-tightened, a toilet seal that isn't seated correctly, or a mismatched part can leak slowly for weeks before anyone notices, and the damage appears in the cabinet, subfloor or ceiling below. A careful install is the cheapest insurance against that.
Before you buy: a few tips
- Check the fit. Faucets need to match the number of holes in your sink or counter. Toilets need to match the distance from the wall to the drain (the "rough-in", commonly 12 inches).
- Check the shut-offs. If the valves under the sink are old or seized, they're worth replacing during the job.
- Not sure what fits? Ask before you buy. A quick call can save you a return trip to the store.
If you've already bought the fixture, we'll install it. If you're still choosing, we're happy to point you in the right direction.
How the job goes
- We check what's there. Shut-offs, supply lines, and anything that might complicate the swap.
- You get a price up front. Before we start work.
- We remove the old fixture and install the new one. Cleanly, with connections checked as we go.
- We test it. We run it, check every connection for leaks, and make sure it drains and flushes properly.
- We clean up. We leave the area as tidy as we found it.
Where we provide fixture installation
We serve Edmonton and the surrounding communities:
Frequently asked questions
Can you install a fixture I bought myself?
Yes. If you've already bought it, we'll install it. If you're still choosing, ask us first so you get one that fits.
Will you replace the shut-off valves too?
If the old ones are corroded, seized or leaking, we'll recommend replacing them during the job. It's much easier to do while the fixture is already out.
How long does a toilet or faucet swap take?
Straightforward swaps are usually quick. Older plumbing or hidden problems can add time, and we'll let you know if we find anything.
What if you find a problem when you open things up?
We stop and explain it before doing anything beyond the agreed work. You decide what happens next.